E200K 
200Mbps PLC Network Adapter
 
Create a Fast, Reliable Network Connection
 Quick and Simple - Just Plug It in!
 
   

Extend your High Speed Internet and stream HD Video throughout your home with this Plug-and-Play kit from ReadyNet. Simply attach one adapter to your Internet or Video access point and plug it into a wall outlet. Plug the other adapter into a wall outlet near your Ethernet enabled HDTV or computer. Connect the adapters with the included Ethernet cables to enjoy High Speed Internet and/or HD quality video anywhere in your home. Easy to install, world class encryption, state of the art technology provides reliable, jitter free enjoyment anywhere in your home.

   
 
Features
• Plug-and-Play installation
• Up to 200Mbps bandwidth over standard home power lines
• HomePlug signal easily passes through circuit breaker panels
• 128-bit AES encryption ensures data security
• Encryption completed by hardware, without sacrifice to bandwidth
• Each adapter includes 1 IEEE 802.3 computer Ethernet ports
• HomePlug AV specification compliant
• Contains 2 Adapters and 2 Ethernet cables

Product Specifications
• Computer Interface: IEEE 802.3/802.3u
• Operating Temperature: 0° to 40° C
• Storage Temperature: -20° to 70° C
• Humidity: 10% to 90% RH (non-condensing)
 
 
  LED Behavior

Security/Power LED (PWR)
• Off – No power
• Solid Green – Connected to power line
• Blinking Green – Encryption in setup mode
• Solid Green – Encryption setup successful

Ethernet Link LED (ETH)
• Solid Green – 10/100Mbps port linked
• Blinking – Ethernet data transmitting or receiving
• Off – No Ethernet link

Power Line LED (PL)
• Blinking – Powerline data transmitting or receiving
• Color Green – Physical link rate greater than 100Mbps
• Color Red – Physical link rate less than 50Mbps
• Color Yellow – Physical link rate in between 50Mbps to 99Mbps
• Off – No powerline link

Hardware Setup
Steps:
1. Locate modem or router at the broadband access point.
2. Plug a network cable (provided) into the modem or router RJ45 network adapter port.
3. Plug the other end of the network cable into the RJ45 port located at the bottom of the Adapter.
4. Plug the Adapter into any wall outlet or HomePlug compliant Power Center.
5. Locate the RJ45 Ethernet port connection on your computer, IPTV or other network device.
6. Plug a network cable (provided) into the computer or network device RJ45 Ethernet port.
7. Repeat steps 3 and 4 for the second Adapter to complete the connection of your computer, IPTV, or other network device to the network.

 Note: Do not plug the adapters into a UPS or power strip with surge protection as they may degrade the powerline communication signal.