• HomePlug AV powerline standard • Ultra small casing • Co-exists with HomePlug 1.0 (14/85Mbps) • Stand-alone unit attaches directly to broadband device and home power lines for seamless integration • Optimized for HD/SD cable, satellite and IPTV installations, home multimedia content and storage, multi-room DVR networking, on-line or networked console and PC video game connections, and much more • Push button security for software-free configuration
• Computer Interface: IEEE 802.3/802.3u • Operating Temperature: 0 to 45 Centigrade • Storage Temperature: -20 to 80 Centigrade • Humidity: 5% to 90% RH (non-condensing)
Security/Power LED (PWR) • Off – No power • Solid Green – Connected to power line • Blinking Green – Encryption in setup mode • Solid Green – Encryption setup successful Ethernet Link LED (ETH) • Solid Green – 10/100Mbps port linked • Blinking – Ethernet data transmitting or receiving • Off – No Ethernet link Power Line LED (PL) • Blinking – Powerline data transmitting or receiving • Color Green – Physical link rate greater than 100Mbps • Color Red – Physical link rate less than 50Mbps • Color Yellow – Physical link rate in between 50Mbps to 99Mbps • Off – No powerline link
Steps: 1. Locate modem or router at the broadband access point. 2. Plug a network cable (provided) into the modem or router RJ45 network adapter port. 3. Plug the other end of the network cable into the RJ45 port located at the bottom of the Adapter. 4. Plug the Adapter into any wall outlet or HomePlug compliant Power Center. 5. Locate the RJ45 Ethernet port connection on your computer, IPTV or other network device. 6. Plug a network cable (provided) into the computer or network device RJ45 Ethernet port. 7. Repeat steps 3 and 4 for the second Adapter to complete the connection of your computer, IPTV, or other network device to the network. Note: Do not plug the adapters into a UPS or power strip with surge protection as they may degrade the powerline communication signal.