ESW200

 

 

Create a Fast, Reliable Network Connection Quick and Simple – Just Plug It in!

The HD Network Adapter and HD 4 Port Switch from ReadyNet allow you to combine up to 4 Ethernet devices and quickly create an in-home broadband network. The kit provides 4 Ethernet ports to easily connect internet gaming consoles and stream high quality audio/video without running new wires. Connect your IPTV, Blu-ray player, satellite or cable receiver, Google TV, gaming
console or other Ethernet enabled device, anywhere in your home,
with simple, powerful, Plug and Play set up.

 

 

 

• Plug-and-Play installation
• Up to 500Mbps bandwidth over standard home power lines
• HomePlug signal easily passes through circuit breaker panels
• 128-bit AES encryption ensures data security
• Encryption completed by hardware, without sacrifice to bandwidth
• Each adapter includes 1 IEEE 802.3 computer Ethernet ports
• HomePlug AV specification compliant
• Contains 2 Adapters, 2 Ethernet cables, installation CD

• Computer Interface: IEEE 802.3/802.3u
• Operating Temperature: 0 to 45 Centigrade
• Storage Temperature: -20 to 80 Centigrade
• Humidity: 5% to 90% RH (non-condensing)

Security/Power LED (PWR)
• Off – No power
• Solid Green – Connected to power line
• Blinking Green – Encryption in setup mode
• Solid Green – Encryption setup successful
Ethernet Link LED (ETH)
• Solid Green – 10/100Mbps port linked
• Blinking – Ethernet data transmitting or receiving
• Off – No Ethernet
link Power Line LED (PL)
• Blinking – Powerline data transmitting or receiving
• Color Green – Physical link rate greater than 100Mbps
• Color Red – Physical link rate less than 50Mbps
• Color Yellow – Physical link rate in between 50Mbps to 99Mbps
• Off – No powerline link
Steps:
1. Locate modem or router at the broadband access point.
2. Plug a network cable (provided) into the modem or router RJ45 network adapter port.
3. Plug the other end of the network cable into the RJ45 port located at the bottom of the Adapter.
4. Plug the Adapter into any wall outlet or HomePlug compliant Power Center.
5. Locate the RJ45 Ethernet port connection on your computer, IPTV or other network device.
6. Plug a network cable (provided) into the computer or network device RJ45 Ethernet port.
7. Repeat steps 3 and 4 for the second Adapter to complete the connection of your computer, IPTV, or other network device to the network.
Note: Do not plug the adapters into a UPS or power strip with surge protection as they may degrade the powerline communication signal.

 

 

ESW200diagram