Contact us
ReadyNet Solutions
ReadyNet Solutions

WR1200 Support and Downloads

ReadyNet WR1200 Wireless Router

Firmware Version - 05/18/2020 (V1.0.19)

  • Added diagnostic.
Download

Firmware Version - 10/05/2020 (V1.0.17)

  • Ragent is fixed so that during an automated upgrade, the settings will be saved if reset=0.
Download

User Guides and Manuals


WR1200 User Manual WR1200 Quick Installation Guide WR1200 Repeater Setup Instructions

Firmware Installation Instructions


To install firmware:

(1) Click the 'Download' button in the Firmware box to download to your computer the latest available firmware for your router.

(2) Disconnect your PC from the internet.

(3) Using an Ethernet cable, connect your computer to the LAN port of the router, open a web browser and log into the web interface (type 192.168.12.1 into the URL field).

(4) Login using your username and password. The default username and password can be found on the bottom of your router.

WR1200 Firmware Instructions 1

(5) Navigate to 'System' -> 'Backup / Flash Firmware'

WR1200 Firmware Instructions 2

(6) Under 'Flash new firmware image' -> click ‘Choose File’.

(7) Navigate to the firmware file you downloaded in step 1 above and select it.

(8) Click the ‘FLASH FIRMWARE...’ button.

(9) On the next screen you will be asked to verify the firmware. Click 'PROCEED'.

WR1200 Firmware Instructions 3

(10) A 'System - Flashing...' page will appear.

WR1200 Firmware Instructions 4

(11) Wait for the router to apply the firmware update.

(12) Once the firmware file has uploaded, the router will reboot and be running the new firmware.


Do not remove power to the router while it is being flashed with new firmware or it may lock up the router and you will not be able to recover. If using your laptop, make sure there is sufficient battery or it is plugged into a power source.


Share by: